Difference between revisions of "Debug"
(Created page with "Microphone echo debugging steps Step 1: Initialize 1. Turn the microphone volume to 12 2. Microphone echo delay adjusted to 0 3.OP is adjusted to 0 4.PGA is adjusted to 4 5....") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
Microphone echo debugging steps | Microphone echo debugging steps | ||
| − | Step 1: | + | Prerequisite: Update the device to software version number 9.1.9 or up |
| + | |||
| + | Step 1: Initialization | ||
| + | |||
1. Turn the microphone volume to 12 | 1. Turn the microphone volume to 12 | ||
| + | |||
2. Microphone echo delay adjusted to 0 | 2. Microphone echo delay adjusted to 0 | ||
| + | |||
3.OP is adjusted to 0 | 3.OP is adjusted to 0 | ||
| + | |||
4.PGA is adjusted to 4 | 4.PGA is adjusted to 4 | ||
| − | 5. Microphone quality adjusted to 1 | + | |
| + | 5. Microphone quality-adjusted to 1 | ||
| + | |||
Step 2: Debugging the Microphone Volume | Step 2: Debugging the Microphone Volume | ||
| − | Firstly, call someone, adjust it by hearing the sound of the microphone on the | + | Firstly, call someone, adjust it by hearing the sound of the microphone on the other phone. |
For example, if the sound is low, gradually increase the OP. | For example, if the sound is low, gradually increase the OP. | ||
Otherwise, if the sound is loudly or noisy, decrease the PGA. | Otherwise, if the sound is loudly or noisy, decrease the PGA. | ||
| Line 15: | Line 23: | ||
Step 3: If there is an echo | Step 3: If there is an echo | ||
When debugging the microphone echo delay, adjust it until there is no echo or the echo very low. | When debugging the microphone echo delay, adjust it until there is no echo or the echo very low. | ||
| − | If there is still a little bit echo, increase the microphone quality. If the echo is still large, then adjust the PGA. | + | If there is still a little bit of echo, increase the microphone quality. If the echo is still large, then adjust the PGA. |
(back to step 3) | (back to step 3) | ||
| − | After | + | After turning these three steps, if the sound too low, you can increase the volume through the microphone |
Note: If the sound is distorted, please adjust the OP, the user can adjust the details according to their own needs | Note: If the sound is distorted, please adjust the OP, the user can adjust the details according to their own needs | ||
Latest revision as of 02:15, 20 April 2020
Microphone echo debugging steps
Prerequisite: Update the device to software version number 9.1.9 or up
Step 1: Initialization
1. Turn the microphone volume to 12
2. Microphone echo delay adjusted to 0
3.OP is adjusted to 0
4.PGA is adjusted to 4
5. Microphone quality-adjusted to 1
Step 2: Debugging the Microphone Volume
Firstly, call someone, adjust it by hearing the sound of the microphone on the other phone.
For example, if the sound is low, gradually increase the OP.
Otherwise, if the sound is loudly or noisy, decrease the PGA.
Step 3: If there is an echo When debugging the microphone echo delay, adjust it until there is no echo or the echo very low. If there is still a little bit of echo, increase the microphone quality. If the echo is still large, then adjust the PGA. (back to step 3)
After turning these three steps, if the sound too low, you can increase the volume through the microphone
Note: If the sound is distorted, please adjust the OP, the user can adjust the details according to their own needs
