S2Update

RSNAV S2 Android MCU Updates

DO NOT USE THIS ON ANY DEVICE OTHER THAN RSNAV S2 ANDROID SYSTEM.
DO NOT UPDATE IF YOUR DEVICE RESOLUTION IS DIFFERENT. DO NOT USE 3G MMI MCU FOR CONCERT/SYMPHONY DEVICE(VICE-VERSA). DO NOT TURN OFF YOUR CAR WHILE UPDATE IS IN PROGRESS. DO NOT REMOVE USB WHILE UPDATE IS IN PROGRESS.
IF WARNINGS ARE NEGLECTED, YOU WILL BREAK YOUR SYSTEM. CONTACT US IF YOU DO NOT KNOW WHAT DEVICE TYPE YOU HAVE.

WE ARE NOT RESPONSIBLE FOR BRICKED DEVICE AND REPAIR WILL BE DONE AT THE COST OF THE BUYER.

Instruction

- Download the appropriate MCU file from the software repository below.

- Unzip to a USB stick formatted in FAT32. The folder path 'update' must be preserved. (e.g. D:\update\mcuupdate\mcuUpdate_audi_d1701C_xx.mce)

- Plug the USB stick into one of the USB ports from the device.

- Go to Car Settings -> System -> Software Version information -> MCU update and follow the screen instruction.

- The device will reboot automatically to normal less than 5 minutes.

{Click Here to go to the software repository}

Update log

• 2020-03-16 1920 x 720 12.3-inch/10.25-inch MCU 3G MMI only

- Fixed BNAV colour distortion issue for 3G MMI BNAV 09-12 to 13-18

- Fixed BNAV MMI console malfunction issue for 3G MMI BNAV 09-12

• 2020-03-20 1280 x 480 8.8-inch MCU update 3G MMI only

- Optimized Audi Original Interface graphics(colour, position)