Projects

Post projects and modifications here.

Always on RSNAV

Goal of this project is to have the device stay powered on after car is turned off.
We need to know what wire to tap into on the RSNAV, and what voltage and amperage battery would be required.

WARNING: PROCEED AT YOUR RISK. YOUR FAILURE HERE IS NOT COVERED BY THE PRODUCT WARRANTY.

[[File:https://cdn.shopify.com/s/files/1/1905/1643/files/1.jpg%7Cframe] 1. Remove 5 screws as well as the bolts and washers holding the audio jack, and the mobile antenna connector

[[File:https://cdn.shopify.com/s/files/1/1905/1643/files/2.jpg%7Cframe] 2. It should look like above before you lift up the backplate.