Help:Tips

Post usage tips here.

'External Audio Source Active' message in the instrument cluster

When you are using the steering wheel left roller button on Android, your instrument cluster would keep show 'External Audio Source Active' message. To clear this message and bring back the speedometer, use the Reset button on the bottom of the right Multifunction wiper control switch stalk instead of any other button in the steering wheel.

Solving Google Crash error

This is due to some apps not getting required permission from the system. Normally, each app should prompt permission request, but somehow it's not working well in current system image builds. To solve this follow the following instruction.

1) Do the factory reset from Realsun Settings

2) Manually correct the date and time according to your location/time zone. This is really important as some encryptions are based on time stamp.

3) After this, update all google apps by logging in to the Play Store. Do not install anything else.

4) Do followings:

For Google Now Launcher

• Go to Android Settings

For RSNAV Audi Launcher

• Go to Apps -> Settings

In Android settings,

• Apps -> Click on the upper right corner three dots -> Click 'Show System' -> Click each app, and give all the permission the app is requiring.

If the error persists, contact us.

SIM Card direction

10.25" Models

7", 10.1" Models

SIM card not recognized even if correctly inserted

If you plugged in the SIM correctly, and when it's not recognizing the SIM yet, try following.

Take out sim card, put it in again in the right direction, hear if you can 'click'. Restart device from realsun setting or start the device if it was off. See if the SIM is recognized, if not Go to (Android)Settings -> About -> Model no. -> touch 10 times fast

or

on Phone app dial to *#*#3646633#*#*

After, when MTK engineering mode pops up, go to 'Telephony section' -> BSPtelephonyDevTool -> click SIM card missing, then SIM plug OUT and finally IN and then reboot.

Most of the time, this solves the problem.

If not, try with other SIM card. Often some SIM card gets damaged and not recognized. It's not important if the SIM card works with other devices, but try another SIM card with the RSNAV Android Device to be sure.

We do test SIM card functionality before we ship every unit.

Increase RSNAV android sound output to a proper value

1. While playing audio(BT or any other media playback) using the volume thumbwheel on the steering wheel, increase the sound volume to the max. When prompted that loud sound can damage your ear, click 'yes' to override the volume control.

2. Go to Apps in the main menu, on Phone app dial to *#*#3646633#*#*

3. When MTK engineering mode pops up, go to the 'Hardware Testing' tab by sweeping from right to left and open 'Audio' tab. Go to 'Headset Mode', and set volume to 49, press 'Set'.

4. In Audi original interface's sound setting, maximize the input level of the external audio input.

5. (BT only) make sure your Phone's Bluetooth volume is set to the maximum. Disable Dolby Atmos for Samsung Phones. Also, disable the Bluetooth absolute volume control from Bluetooth settings on your Android Phone.