Help:Reporting bugs

Post any bugs you've found, or fixes you have. Please provide MMI version, RSNav product number, and vehicle year and model.

High Priority

Data Connection not working

• I've recently started having the problem where the mobile data connection stops working, despite Android showing it has a signal (4g or 3g). Daniel is currently troubleshooting the problem with me.

 There have been few cases that ambient temperature is affecting cellular data capability. We notified the modem supplier.

Multitronc in manual mode 8 gears the 2nd gear activates rear camera

• AUDI A5 2.7TDI MULTITRONIC 2008 RADIO SYMPHONY - RSNAV (RSA70201)

 1-With the change of MULTITRONIC 8V gears in manual mode the rear camera application is activated each time you select the 2 gear. (Is very annoying)
 
 <POSITION GEARS>
 P-No Active
 R-(Active Camera)
 N-No Active
 L-No Active
 S-No Active
 1-No Active
 2-(Active Camera)
 3-No Active
 4-No Active
 5-No Active
 6-No Active
 7-No Active
 8-No Active
 
 2-The reverse gear application hangs up and does not show the directional lines.
 It works sometimes and sometimes it does not.

Parking Brake Malfunction and TPMS malfunction

• Audi S5 4.2 Manual 2008 Radio Radio Symphony
• Audi A5 2.7 TDI MULTITRONIC 2008 Radio Symphony - RSA 70201 (same problem)

 Every time you start the car the Parking brake Malfunction error comes up and after 15min of driving the TPMS malfunction error comes up. The parking brake still functions but the errors are constant.
 Also, have a problem with the reverse camera guidelines and PDC radar not functioning after a few days.

 Possible Solution: Using Ross-Tech VCDS, clear the airbag fault code first, and then clear the parking break code. Do it manually on each control unit, not clearing DTC option in Automatic Scan menu. This was caused by turn the system on while the hazard flasher was detached during installation. Also, Disable Park Radar Key in Realsun Setting, if you don't have OEM PDC. If you have OEM backup camera and OEM PDC, Enable Park Radar Key, and choose rear camera type as Original in Realsun Setting.

Volume Adjust App misbehaving on Bluetooth call

• Every time you go into the Bluetooth app to make a phone call the main volume drops down to 0% in order for the music to be silent in the background and the voice call volume also drops to about 60% (even if it was set to a 100%). During the call you need to get out of the bluetooth app go to the volume app increase the volume so that you can actually hear the other person correctly. Also when finishing the call the music will be silent and you need to increase the volume in the volume app higher in order to hear music again.

 This is not a Bluetooth problem, but it's Volumeadjust.apk's bug, which is designed to mute any background sound for the BT voice call, but it seems the app is not sensing BT call termination properly. This will be fixed sooner or later.

OEM Backup Camera functionality

• When you put vehicle in reverse while Android screen, the parking camera appears. When put in drive, the rear screen disappears. It should remain viewing. OEM function is to display until > 8 mph speed which happens in Audi MMI mode. This permits driver to correct a parallel parking distance forward and back motions until completed. Android screen should stay on backup camera mode similarly.

Audi Side Assist not working

• 8.8" Android Q5 MMI HN+
• Audi Side Assist not longer working. No indicator lights. VCDS says cannot find system. Conflict in CANBUS?

Normal Priority

Brightness Reversed

• Android brightness setting is reversed.

Low Quality Google Voice

• My Google voice for Maps and Now cracks and pops, like high treble, low quality audio. It is using the higher quality data voice, and not TTS voice, but it doesn't sound as good as music played through the RSNAV.

Climate Control Overlay

• The climate control overlay is in Celsius only and cannot be changed
• The overlay cancels anything that is split screened.
• on 10.25 in version, the right climate control overlay shows up outside of it's box
• on 7" occasionally there´s a lag when showing the overlay. Besides, some characters appear in Chinesse, though the temp is absolutely readable.

Proposed fix: allow the AudiWind service to be disabled and allow configuration of the application.

Bluetooth Functionality

• Bluetooth serial communication(e.g. Bluetooth Mouse, keyboard, and OBD II adapter) is disabled on all model for now because a handling protocole is not yet ready.

 DO NOT POST A PROBLEM IN VAGUE TERMS. PREVIOUSLY, THE SECTION STATES 'BLUETOOTH IS DISABLED FOR 10.25"'. THIS IS HEAVILY MISLEADING STATEMENT. THIS IS NOT YOUR REGULAR ANDROID TABLET, THE DEVICE IS MOSTLY ACTS AS RECEIVER, NOT TRANSMITTER, THAT'S WHY YOU CAN'T ACCESS BLUETOOTH SETTINGS IN THE ANDROID SETTINGS. PRECISELY, BLUETOOTH HANDS-FREE(HFP), MUSIC STREAMING(A2DP, AVCTP) WORKS FLAWLESSLY.

Default nav app

• In "Realsun settings-navi app choice" no new navs installed are available. This selection allows wheel button hot start for the nav selected in Realsun.

Startup Brightness

• Upon startup, the unit does not check what the status of the headlights is. Example:if it's dark out and I start my car, when Android finally comes up the brightness is very high. However if I toggle the headlights OFF then back ON, Android brightness dims to where it should be. There should be a check when Android boots to check headlight status and adjust accordingly.

Fixed

Brightness on Startup

• Ajusted: Unit needs to start up at 0% brightness, as Audi animation can be blinding at night. I currently wait till the Audi logo comes up to begin driving.

OEM Reverse Camera Not showing

• Fixed: Change setting to original in Realsun Setting under Camera selection option.

Airbag light is on

• Fixed: Clear the error using VCDS or Carista. If the error comes back, you may need to contact RSNAV for a new flasher board.

Language Translations to English

• Fixed as suggested
• Boot screen currently says "using navigation may not divert your attention from the road and traffic" It should say something like "Distracted Driving Kills. Pay Attention to the Road. Use the System only when Safe." or "Using Navigation Diverts Your Attention from the Road. Use only when Safe to do so."
• "Realsun Setting" should read "Realsun Settings"
• "System volume" should read "System Volume" This keeps with the same punctuation throughout the settings menu
• In "System volume" suggest "volume value" change to "System Volume" or "Master Volume" - I am assuming this is the master volume control just like the volume control on the radio or steering wheel
• In "System volume" there appears to be a check box to reset to default volume. This should read "Reset to System Default Value"
• Bluetooth Settings- "Reset the bluetooth" should be changed to "Reset Bluetooth". "In the search" should be changed to "Search for Available Bluetooth Devices"
• Bluetooth Settings - when a device is connected and shows up, it should read "Connected Bluetooth Devices"
• "Network Settings" should read "Cellular Network Settings" This takes you to the android settings menu to configure a SIM card.
• "Video In-Motion Lock" could be changed to "Video in Motion Settings". I am not sure what "safe lifting" refers to, but i think it is safe operation? if so, this should say "Video in Motion" with the check box saying "Enable Video in Motion" I am not sure I fully understand what this setting is telling me it can and cannot do. May need more info to clarify and get a better translation.
• "Reverse trajectory" should read "Rear Camera Parking Lines" Within that setting "Hidden" should say "Show Rear Camera Parking Lines" and "Hide Rear Camera Parking Lines"
• Turn Off Display opens a menu which doesn't really refer to the first option (turn off display). This should say "Turn off Display" and then in the next screen "Close Display" with Yes or No. The yes and no do not follow previous menus with a radio icon. Need to add icon to keep everything the same.
• "System upgrade" is misleading. You don't upgrade in this menu. This should read "System Version Information"
• "Restart the system" should read "System Reboot" Radio keys are missing in the next menu.
• "Restore" should read "Factory Data Reset"
• "Navigation App Choice" should change to "iNav Button Quick Launch"
• "Reverse View Setting" should change to "Rear Camera Settings" "Original car camera" should change to "OEM Rear Camera Installed". "Equipped with a camera" should change to "Aftermarket Rear Camera Installed"
• "Parking Radar Setting" should change to "Parking Radar Settings". "Reversing radar" should change to "Rear Camera Radar" "Display" could be changed to "Show Radar" "Hidden" could be changed to "Hide Radar"
• "Startup Interface Setting" could be changed to "Startup System Options". "Original car interface" should be changed to "OEM Audi Interface" "Main interface" should change to "RS Nav System"
• "Music on Background" is a little confusing. i understand its muting whatever music is playing when navigation needs to say something. Should be "Music Pause for Navigation". Within that setting, it should say "Pause Media when Navigation is Active"
• "Navi Button Setting" should read "iNav Button Settings" Map doesnt really tell you what its opening. This should read google maps, or waze, etc. "Browser" should read "Internet Browser". "Navi Key" should read "iNav Button".
• "Overlay Display Time" - i dont really know what this is referring to. need more information. Within this menu, "Not show" should read "Do Not Show".
• "Wheel Key" should read "Steering Wheel Button Settings"
• Car style menu - "Car Style Choose" should read "Car Style Icon"

I see in the realsun settings menu the circle has two 90* lines above it. Looks like a bounding layout that shouldnt be showing up?

If and when these changes are made, pay attention to punctuation and capitalization.