Difference between revisions of "Projects"
Daniel-RSNAV (talk | contribs) (→RSNAV Coin battery) |
Daniel-RSNAV (talk | contribs) |
||
| Line 14: | Line 14: | ||
'''WARNING: PROCEED AT YOUR RISK. YOUR FAILURE HERE IS NOT COVERED BY THE PRODUCT WARRANTY.''' | '''WARNING: PROCEED AT YOUR RISK. YOUR FAILURE HERE IS NOT COVERED BY THE PRODUCT WARRANTY.''' | ||
| − | + | https://cdn.shopify.com/s/files/1/1905/1643/files/1.jpg?1508211567302481072 | |
1. Remove 5 screws as well as the bolts and washers holding the audio jack, and the mobile antenna connector | 1. Remove 5 screws as well as the bolts and washers holding the audio jack, and the mobile antenna connector | ||
| − | + | https://cdn.shopify.com/s/files/1/1905/1643/files/2.jpg?1508211567302481072 | |
2. It should look like above before you lift up the back plate. | 2. It should look like above before you lift up the back plate. | ||
Revision as of 13:49, 2 February 2018
Post projects and modifications here.
Always on RSNAV
- Goal of this project is to have the device stay powered on after car is turned off.
- We need to know what wire to tap into on the RSNAV, and what voltage and amperage battery would be required.
RSNAV Coin battery
- Project: Add coin battery to keep time.
WARNING: PROCEED AT YOUR RISK. YOUR FAILURE HERE IS NOT COVERED BY THE PRODUCT WARRANTY.
https://cdn.shopify.com/s/files/1/1905/1643/files/1.jpg?1508211567302481072 1. Remove 5 screws as well as the bolts and washers holding the audio jack, and the mobile antenna connector https://cdn.shopify.com/s/files/1/1905/1643/files/2.jpg?1508211567302481072 2. It should look like above before you lift up the back plate.
