Projects

From RSNAV
Revision as of 13:51, 2 February 2018 by Daniel-RSNAV (talk | contribs) (RSNAV Coin battery)
Jump to: navigation, search

Post projects and modifications here.



Always on RSNAV

  • Goal of this project is to have the device stay powered on after car is turned off.
  • We need to know what wire to tap into on the RSNAV, and what voltage and amperage battery would be required.


RSNAV Coin battery

  • Project: Add coin battery to keep time.

WARNING: PROCEED AT YOUR RISK. YOUR FAILURE HERE IS NOT COVERED BY THE PRODUCT WARRANTY.

1. Remove 5 screws as well as the bolts and washers holding the audio jack, and the mobile antenna connector

2. It should look like above before you lift up the back plate.