Difference between revisions of "Updates"

From RSNAV
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
== RSNAV 2nd Generation Standalone Smartphone Interface System Software Updates ==
 
== RSNAV 2nd Generation Standalone Smartphone Interface System Software Updates ==
−
  '''DO NOT USE THIS FOR 4TH GENERATION CARPLAY INTERFACE, THIS IS ONLY FOR 2ND GENERATION INTERFACE.'''
+
  '''DO NOT USE THIS FOR 4TH GENERATION CARPLAY INTERFACE, THIS IS ONLY FOR 2ND GENERATION INTERFACE(End of Service Life).'''
 
  DO NOT UPDATE WITH WRONG RESOLUTION. IT WILL BREAK YOUR SYSTEM. CONTACT US IF YOU DO NOT KNOW WHAT RESOLUTION YOU HAVE. THIS IS THE FIRST SOFTWARE TO UPDATE BEFORE ANY OTHER UPDATE.  
 
  DO NOT UPDATE WITH WRONG RESOLUTION. IT WILL BREAK YOUR SYSTEM. CONTACT US IF YOU DO NOT KNOW WHAT RESOLUTION YOU HAVE. THIS IS THE FIRST SOFTWARE TO UPDATE BEFORE ANY OTHER UPDATE.  
 
Instruction
 
Instruction
Line 7: Line 7:
 
  3. Insert USB memory stick to the USB port of the device while the device is powered on.
 
  3. Insert USB memory stick to the USB port of the device while the device is powered on.
 
  4. A Chinese message will appear. This is normal, and wait. It takes about 10 mins.
 
  4. A Chinese message will appear. This is normal, and wait. It takes about 10 mins.
−
  5. Do not interrupt until the device restarts automatically. Maintain electricity power by running your motor idle. Do not operate the device or the vehicle. After successful update, the device will boot up normally.  
+
  5. Do not interrupt until the device restarts automatically. Maintain electricity power by running your motor idle. Do not operate the device or the vehicle. After a successful update, the device will boot up normally.  
  
−
* RSNAV Smartphone interface 2nd Generation with HDMI port system software, 800 x 480, 3G MMI HIGH and PLUS, Not for A3 8V low resolution, Non-RSNAV units [BETA]: [https://drive.google.com/open?id=17GrAZQToB4WlKAERvvJPARU5JJBtrQoK 20180314-ENG-2G]
+
* RSNAV Smartphone interface 2nd Generation with HDMI port system software, 800 x 480, 3G MMI HIGH and PLUS, Not for A3 8V low resolution, Non-RSNAV units  
  
−
Update log
+
[https://drive.google.com/open?id=1PYDzThzqD_I_mWiiNjQxHAv_4MjVR2Dl Access to the repository]
−
2018.03.16: the first update. Fixed phone call echo problem in CarPlay. Added support for wired screen mirroring for iPhone and Android smartphone. Improved stability. Fixed MCU to be updatable. Known problems: Not confirmed Android Auto running or not yet. 'CarLife' icon in the main menu is supposed to run Android Auto. Some menu and notification are still displayed in Chinese.
 
−
 
 
−
== RSNAV Standalone Smartphone Interface Steering wheel support updates ==
 
−
'''DO NOT USE THIS FOR 4TH GENERATION CARPLAY INTERFACE, THIS IS ONLY FOR 2ND GENERATION INTERFACE.'''
 
−
DO NOT UPDATE WITH OTHER CAR MODEL FIRMWARE OR TO NON-RSNAV DEVICE. IT WILL BREAK YOUR SYSTEM. CONTACT US IF YOU HAVE A DOUBT.
 
−
 
 
−
Instruction
 
−
1. Download firmware file from the link.
 
−
2. Copy update.bin to the root of a USB Stick(Must be formatted in FAT32).
 
−
3. Insert USB memory stick to the USB port of the device after the device is completely booted.
 
−
4. Once the unit is booted (e.g. you see the main menu), select the arrow/back icon on the top right.
 
−
5. When a popup with Chinese writings and 2 options appears, choose the option on the left
 
−
6. If another pop-up appears, the USB key starts flashing (if there’s an LED - indicates writing firmware) and then it reboots.
 
−
7. Remove the USB stick before it boots up normally to Media player, if not it will be in a loop of updating.
 
−
 
 
−
* 3G MMI HIGH(HNAV) (2009-2012, before FL) A4, A5, S4, S5, Q5: [https://drive.google.com/open?id=1MBI9CRfH-rhUEwQpgkAOTHe7BtIa_7V0 20180316]
 
−
* 3G MMI PLUS(HN+) A4, A5, S4, S5, Q5(aft. 2012, FL), All C7(A6, A7 and etc): [https://drive.google.com/open?id=1B70b_ptJuZ4FEeVLahvmUwSIDjjFn5dc 20180316]
 
−
* A8 D4(2012-2017): [https://drive.google.com/open?id=1gOjn0cy3pRu8NYZ7KSlhc_gHUMhcPFCV 20180316]
 
−
* Q7 4L(2011-2015): [https://drive.google.com/open?id=10iG-XTC_JyqjTcq4cqJo-5YBgx7SSVfY 20180316]
 

Latest revision as of 02:21, 2 August 2019

RSNAV 2nd Generation Standalone Smartphone Interface System Software Updates

DO NOT USE THIS FOR 4TH GENERATION CARPLAY INTERFACE, THIS IS ONLY FOR 2ND GENERATION INTERFACE(End of Service Life).
DO NOT UPDATE WITH WRONG RESOLUTION. IT WILL BREAK YOUR SYSTEM. CONTACT US IF YOU DO NOT KNOW WHAT RESOLUTION YOU HAVE. THIS IS THE FIRST SOFTWARE TO UPDATE BEFORE ANY OTHER UPDATE.

Instruction 

1. Download firmware file from the link below.
2. Unzip the zip archive, and copy all individual files(e.g. .bin files and everything else) to the root of a USB memory stick(Must be formatted in FAT32).
3. Insert USB memory stick to the USB port of the device while the device is powered on.
4. A Chinese message will appear. This is normal, and wait. It takes about 10 mins.
5. Do not interrupt until the device restarts automatically. Maintain electricity power by running your motor idle. Do not operate the device or the vehicle. After a successful update, the device will boot up normally.
  • RSNAV Smartphone interface 2nd Generation with HDMI port system software, 800 x 480, 3G MMI HIGH and PLUS, Not for A3 8V low resolution, Non-RSNAV units

Access to the repository

Retrieved from "https://rsnavwiki.com/index.php?title=Updates&oldid=704"