Difference between revisions of "Update3"

From RSNAV
Jump to: navigation, search
(added 9.1.0.yl.a)
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
== RSNAV 4th Generation Standalone Smartphone Interface System Software Updates ==
 
== RSNAV 4th Generation Standalone Smartphone Interface System Software Updates ==
  '''DO NOT USE THIS FOR 2nd GENERATION CARPLAY INTERFACE AND 4th GENERATION WIRED INTERFACE. THIS IS ONLY FOR THE '4TH GEN. M' OR 'WIRELESS' STICKER ATTACHED UNIT '''
+
 
 +
  '''As of 9.2.2.yl.a, to protect the license we paid, there is an additional security mechanism implemented. If you upgrade the CarPlay unit purchased from somewhere else, you are risking bricking your purchase. RSNAV will not be held responsible for it.'''  
  
 
Instruction
 
Instruction
  
1. Download the zip file and extract ISPBOOOT.BIN file into a USB stick formatted in '''FAT32(No NTFS, ExFAT or etc, under 64GB, Do not make any folder).
+
1. Download the zip file and extract ISPBOOOT.BIN file into a USB stick formatted in '''FAT32(No NTFS, ExFAT or etc, under 64GB, Do not make any folder).'''
'''
 
2. Plugin the USB stick and go to Setup -> System Upgrade -> Software upgrade(Not MCU).
 
  
The Zip file password is '''rsnav.com'''
+
2. Plugin the USB stick and go to Setup -> Software Update -> Software upgrade(Not MCU) -> Password: 4091
  
This file can be used in the wireless version of the standalone interface. There is no variation of firmware according to the screen resolution.  
+
This file can be used in both the wireless version and wired of the standalone interfaces in 'black' box There is no variation of firmware according to the screen resolution.  
  
 
Update requirements: initial software version must be 8.2.0 or 9.0.0 up.
 
Update requirements: initial software version must be 8.2.0 or 9.0.0 up.
Line 22: Line 21:
 
C.  9.0.X to 9.1.0 version, Go to setup, use the system update and then upgrade.
 
C.  9.0.X to 9.1.0 version, Go to setup, use the system update and then upgrade.
  
Latest update: Version 9.1.0
+
To update MCU, delete the ISPBOOOT.BIN file and copy the upgrade.bin file to the drive instead.  Follow the same steps as above but choose MCU upgrade instead.
  
9.1.0.yl.a + MCU 8.10.0
+
[https://drive.google.com/open?id=121YZosdDkDSMmH6mAWVTwiuxYPJ9jASA Click Here to Download]
 
 
- Constant call echo for other party causing calls to become almost impossible. All phones may be affected, tested on Pixel 3, Pixel 4 and iPhone.
 
- No wireless capability for Google Pixel phones, possibly other Android units also affected. iPhone ok.
 
- Unit occasionally cuts out and boots user back to Audi interface.
 
- Touchpad no longer works, scroll wheel is only available option. Due to this, some options are unreachable.
 
 
 
9.1.0 Update details
 
 
 
- Remove 'Pre-Production Model, Not For Resale' Watermark.
 
 
 
9.0.5 Update details
 
 
 
- Bug fixes
 
  
- Sound Adjustment
+
Make sure that the USB is formatted with 16kb cluster
 
 
- Allow to turn off Parking Sensor and Parking Guideline.
 
 
 
- Allow to turn off front camera view left - right inversion.
 
 
 
- Allow to front camera view showed automatically after reverse view in a preset interval.
 
 
 
Bugs outstanding:
 
 
 
- No Wireless using Pixel 3 phone (other phones may also not work)
 
 
 
- Phone calls have severe echo making this feature unusable
 
 
 
[https://drive.google.com/open?id=121YZosdDkDSMmH6mAWVTwiuxYPJ9jASA Click Here to Download]
 

Latest revision as of 03:05, 25 June 2021

RSNAV 4th Generation Standalone Smartphone Interface System Software Updates

As of 9.2.2.yl.a, to protect the license we paid, there is an additional security mechanism implemented. If you upgrade the CarPlay unit purchased from somewhere else, you are risking bricking your purchase. RSNAV will not be held responsible for it. 

Instruction

1. Download the zip file and extract ISPBOOOT.BIN file into a USB stick formatted in FAT32(No NTFS, ExFAT or etc, under 64GB, Do not make any folder).

2. Plugin the USB stick and go to Setup -> Software Update -> Software upgrade(Not MCU) -> Password: 4091

This file can be used in both the wireless version and wired of the standalone interfaces in 'black' box There is no variation of firmware according to the screen resolution.

Update requirements: initial software version must be 8.2.0 or 9.0.0 up.

Upgrade method:

A. 8.2.0 or 9.0.0 version, press and hold BACK button twice to force the upgrade.

B. 9.0.1 to 9.0.3 version, use the system upgrade in the Setup menu.

C. 9.0.X to 9.1.0 version, Go to setup, use the system update and then upgrade.

To update MCU, delete the ISPBOOOT.BIN file and copy the upgrade.bin file to the drive instead. Follow the same steps as above but choose MCU upgrade instead.

Click Here to Download

Make sure that the USB is formatted with 16kb cluster