Projects

Post projects and modifications here.

Always on RSNAV

• Goal of this project is to have the device stay powered on after car is turned off.
• We need to know what wire to tap into on the RSNAV, and what voltage and amperage battery would be required.

RSNAV Coin battery

• Project: Add coin battery to keep time.

WARNING: PROCEED AT YOUR RISK. YOUR FAILURE HERE IS NOT COVERED BY THE PRODUCT WARRANTY.

File:Https://cdn.shopify.com/s/files/1/1905/1643/files/1.jpg?1508211567302481072 1. Remove 5 screws as well as the bolts and washers holding the audio jack, and the mobile antenna connector File:Https://cdn.shopify.com/s/files/1/1905/1643/files/2.jpg?1508211567302481072 2. It should look like above before you lift up the back plate.