Projects
Post projects and modifications here.
Always on RSNAV
- Goal of this project is to have the device stay powered on after car is turned off.
- We need to know what wire to tap into on the RSNAV, and what voltage and amperage battery would be required.
RSNAV Coin battery
- Project: Add coin battery to keep time.
WARNING: PROCEED AT YOUR RISK. YOUR FAILURE HERE IS NOT COVERED BY THE PRODUCT WARRANTY.
1. Remove 5 screws as well as the bolts and washers holding the audio jack, and the mobile antenna connector
2. It should look like above before you lift up the back plate.
